I made a piano using my Lego blocks. Even if there is no block of the same type as the video, there is no problem as long as it has the same shape. It is OK even if the color of the LEGO block is different.
↓↓↓ I will explain with pictures and text from here.
↑ Please try aligning the blocks in the photo above.
１）Attach “Plate 1 × 1 Round (Transparent Small Parts)” to “Plate 1 × 2”.
２）Attach the part created in No. 1 to “Block 1 × 4”.
３） Attach “Plate 1 × 1 Round (Transparent Small Parts)” to “Plate 1 × 2”.
４）Attach the part created in No. 3 to “Block 1 × 6”.
５）Overlay 4 pieces of “Tile 1 × 2 Grill (white parts)” on “Plate 1 × 4” as shown in the picture. This is where the piano keyboard will be, so I think white is good.
６）Attach “Tile 1 × 2 Grill” to “Tile 2 × 4”
７）Attach two “Plate 4 × 4 Round Corner”. This time I have no stock and the colors are black and brown, but if possible, 2 blacks are the best. If even one sheet is black, it is OK if the upper side is black.
↑ Like this.
8）Attach two “Plate 2 × 4” pieces.
9）Attach the parts made with No. 1 and No. 3 with “Tile 1 × 6” as shown in the picture.
10）Attach the parts made with No. 7 and No. 8 as shown in the picture.
11）Turn the part made with No. 10 over and attach the keyboard.
12）Turn the keyboard created in No. 6 and attach it like a photo.
13）Attach two “Telescopes” to “Plate 1 × 4” as shown in the picture.
14）Attach two “Telescopes” to “Plate 1 × 6” as shown in the picture.
15）Attach the parts (legs) made with No. 13 and No. 14 as shown in the picture.
It’s complete.
Next time I’ll make a grand piano ♪
この記事へのコメントはありません。